KETT FD-800 Infrared Moisture

Rp 000

KETT FD-800 Infrared Moisture Determination Balance KETT FD-800 employs a dual temperature sensing method to achieve highly precise moisture measurements. In addition to the thermistor that measures the environment temperature within the drying chamber, it is mounted with a radiation thermometer that measures the sample temperature directly without contact. ●Specifications FD-800 Measurement method Detection of weight loss by heating & drying Sample mass 0.1-120g (optional weight sampling) Measurement subject Moisture / Solid content / Weight Measurement range 0-100% (wet base, solids); 0-500% (dry base) Repeatability (standard deviation) Sample with a weight of 5g or higher : 0.05% Sample with a weight of 10g or higher : 0.02%) Resolution Moisture percentage 0.01% / 0.1%; Weight 1 mg Temperature setting range for thermistor (T1): 30 - 180°C (1°C interval); for radiation thermometer (T2) 30 - 250°C (1°C interval) Measurement modes Automatic stop mode, Timer stop mode, Rapid drying mode, Equilibrium drying mode, Step drying mode, Predictive (comparative) measurement mode External output RS-232C interface Environmental conditions Temperature 5~40°C , Humidity : max of 85%RH Pollution degree 2 , Altitude up to 2000m Sample dish SUS (diameter 130 mm, depth 13 mm) Heat source Mid-wave infrared quartz heater (200Wx2) Power source AC100~120V / 220~240V (50/60Hz) Power consumption Max 900W Dimensions & weight 220(W)x415(D)x190(H), 4.5kg , Shipment 310(W)x580(D)x400(H), 10kg Accessories Spare sample pan, Aluminum sheets, etc Options Printer Set (VZ-330, Printer Cable: VZC-14) 10x Printer paper rolls, 500x Aluminum sheets Radiation thermometer calibration kit GF-200 (digital thermometer, standard heating sample), FD- 800 Data logger software FDL-01 (RS-232C cable, USB-RS232C conversion cable), Windshield with deodorizer case FW-100